SC

Section 1.01    TECHNICAL  FEATURES

FRAME

1. The seat and the back are made of 10 mm thick natural beech ply-wood, varnished (available in Class 1 fire-retardant) or padded and upholstered (available in Class 1lM fire-retardant version) with the backrest material in polypropylene.
2. The screws are not-unscrewing and the nuts are self-locking.
3. All metal parts are painted with epoxy powders and the small components are protected by a black zinc galvanizing process.

Fixed Seat, on beam

1. The leg is made of oval tubular steel, dimensions 90 x 30 x 2 mm, welded to an oval steel foot 60 x 30 x 1.5 mm with two nylon little feet.
2. The bearing beam is made of 80 x 40 x 2 mm rectangular steel tube.
3. The frame is made of 25 x 1.5 mm tubular steel.

Tip-up seat, on beam

1. The leg is made of elliptical tubular steel, dimensions 76 x 25 x 2 mm, welded to an oval steel foot, dimensions 265 x 90 x 2.5, with two holes for the floor fixing.
2. The bearing beam is made of 80 x 40 x 2 mm rectangular steel tube.
3. The tip-up movement of the seat is mounted on brass bushes and works automatically with a return spring fitted in a polypropylene fulcrum cover.
4. The supports of the seat are made of stamped steel and are 4 mm thick (welded support) or of 3 mm thick (mobile support), whereas the supports for the backrest are in 25 x 1.5 mm tubular steel.

Seating on integral mount for canteen table

1. The leg is in 89×2 mm tubular steel with foot in polypropylene.
2. The supporting cross-pieces are in 60x30x3 rectangular tubing.
3. The rotational movement of the seat is 1800, with a return spring which acts on a ball bearing.
4. The framework is in 25×1.5 mm diameter tubular steel.

PADDING

1. They are made with expanded non-deformable resins.
2. The back is 20 mm thick with a 25 kg/m3 density.
3. The seat is 25 mm thick with a 40 kg/m3 density.

ARMRESTS

1. Fixed chair, swivel chair, or bench with fixed seating The armrests are in black painted steel, 16 mm diameter, the finish on the top is of injection formed polypropylene.

Mobile seating on beam

1. The armrests are in black painted tubular steel, 25×1.5 mm diameter, the finish on the top is made of injection formed polypropylene.

ANTI-PANIC WRITING TABLET

1. The anti-panic writing tablet is made of HPL (High Pressure Laminated) material, 8 mm thick, with rounded edges, black coloured; the anti-panic device is aluminium made with a polypropylene cover.

SMALL FIXED TABLE FOR BENCH

1. Made of 24 mm thick pressed wood, laminate-clad and with rubber edges, both in black; fastened to the beam by a 160×160 mm steel plate and steel omega.

CANTEEN TABLE

1. Made of light grey, water resistant, pressed-wood laminate 29 mm thick, with rounded edges in black PVC, 120 x 80 cm in size.

BOOK BASKET

1. Made of electro-welded steel wire, 6 mm thick.

Section 1.02    WARRANTY

Warranty for specified Navetta Lecture Room Products: Symmetra • Symmetra Plus • Omnia • Monolito

1. Navetta provides the following warranty to the original purchaser of the above listed Navetta products sold in North America and installed by Navetta-approved installers. This warranty begins on the date of product invoice, is governed by and subject to the terms and conditions detailed below, and is non-transferable.
2. Navetta warrants its products to be substantially free from material defects in materials and craftsmanship. Defects found during normal usage of the product will be covered during the warranty period set out below, provided that written notification of the alleged defect is given to Navetta at the address below prior to expiration of the applicable period. Navetta will at its sole discretion either repair or replace the product it determines to be defective with a comparable product. All other costs are excluded.
3. The fulfillment of the warranty is under the control of Navetta. In the event Navetta fails to repair or replace a product it has determined is defective as provided herein, the purchaser’s sole remedy shall be the return of the purchase price actually paid by purchaser for the defective product on a prorated basis based upon a useful life of ten (10) years.

Warranty Period

1. Within ten (10) years of initial shipment: Fixed structural components.
2. Within five (5) years of initial shipment: All other structural components, including seat support arms and pivot mechanisms, springs, tablet arms.
3. Within three (3) years of initial shipment: Plastic components and paint finishes, wood, laminate and other surface finishes (note conditions as to color, grain, and texture set forth below).
4. Within one (1) year of initial shipment: Power and electrical components, seating upholstery including foam (note restrictions as to color, grain, and texture below).

Exclusions and Conditions
This warranty excludes and does not apply to:

1. Conditions other than normal wear and tear.
2. Abuse, neglect, vandalism, or misuse.
3. In-transit damage.
4. Products altered or modified by the purchaser.
5. Products installed on flooring that does not meet structural standards.
6. Purchaser supplied or specified material, leather, and non-standard material and color finishes (whether purchased by the purchaser or Navetta).
7. Natural variations occurring in wood and leather and/or color fastness and/or variations in matching of colors, grains or textures of materials.
8. Product color change due to natural aging, UV exposure, cleaning solutions, or other causes.

Disclaimer of all Other Warranties

1. There are no other warranties than those expressly stated above, whether expressed or implied (including, but not limited to any warranty of merchantability or fitness for any particular purpose). Navetta is not liable for consequential or incidental damage arising from any product defect.

Limitation of Liability

1. Navetta’s total liability hereunder shall not exceed the purchase price paid for the allegedly defective product. In no event shall Navetta be liable for any indirect, consequential, incidental or special damages, including lost profits, loss of reputation, loss of goodwill, lost revenue, or any other economic or non economic loss.

Warranty Notice Address

Navetta division of Shuttlesystem
11340 Montgomery Road, Ste 200
Mason OH 45040
513-489-3727

Technical Specifications Fully dismountable armchair with separate elements.

Seat Inner structure in tubular steel 25x25x2, with Pirelli rubber and polypropylene webbing. Seat padding in self-extinguishing polyurethane, cold-foamed, without CFC, complying with UNI 9175, minimum polyurethane density 55 kg/m3, attached to the plywood structure with water based resins glue. Fabric upholstery adheres to the padding without use of glue and is sealed by a zipper.

Backrest inner structure in 13 mm beech ply-wood with side supports in 5 mm thick steel plate.Backrest padding in self-extinguishing contoured polyurethane foam, average thickness of 65 mm and density 40 kg/m3, attached to the plywood structure with water based resins glue. Fabric upholstery adheres to the padding without use of glue. Lower back protector in 1mm thick steel plate.

Side leg in 4mm structural steel with padded side panels; kick plate in 3mm steelplate; side panels in 8mm thick fir chipboard. Side padding in self-extinguishing contoured polyurethane foam, attached to the side panel by water based resins glue. Front and back padding in self-extinguishing contoured polyurethane foam, 65 kg/m3 density attached to the side panel by water based resins glue.

Arm caps: Option 1: padded and upholstered; Option 2: natural varnished solid beechwood Option 3: polyurethane. Seat mechanism: The flip-up mechanism of the seat works by gravity. The floor fixing bracket is in steel 4 mm. thick. The kick plate is in grey varnished steel plate or in varnished solid beechwood. All visible metal parts are in grey color, painted with epoxy scratch-resistant powders. The armchair has the Italian Class 1IM Certificate for flame retardancy from the Italian Ministry of the Interior.

WRITING TABLET Genesis Evolution can be equipped with a flip up writing tablet inside the armrest, in High Pressure Laminated (HPL), overall dimensions (226 x 310 x 8 mm), with rounded edges, black colour; the anti-panic mechanism of the tablet is in steel. As an alternative an antipanic table fixed on the back, scratch-resistant bilaminate wood conglomerate with squared front edge ( no bull nosed) Side and back edges in ABS, 2 mm thick; standard depth 300 mm, standard thickness 30 mm.

The table brackets are in 3 mm thick stamped steel. Its movement is obtained by using two stamped steel hinges which are 5 mm. thick and rotate on brass bushes.

ACCESSORIES: -Embroidered and row numbering, -Row terminal light.

Section 1.01    SUMMARY

1. Auditorium Seating
2. Fixed Auditorium Seating with Tablet Arm
3. Extent: Seating to be as indicated on drawings and as specified

Section 1.02    PRODUCT DESCRIPTION

1. Seat Requirements:
2. Chair: provide and install fixed auditorium seating with uplift seat bottom and optional anti-panic tablet arm per drawing.
3. Dimensions are nominal and based on current product information.

Section 1.03    SUBMITTALS

1. General: Submit listed submittals in accordance with Contract and standard Submittals Procedures.
2. Product Data: Submit manufacturers’ product data, including product specification sheets, for products specified.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths.
4. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material.
5. Quality Assurance Submittals; Submit the following:
6. Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
7. Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating.
8. Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may affect the assembly or installation of products required.

Section 1.04    WARRANTY

1. Project Warranty: Refer to “Conditions of the Contract” to project warranty provisions.
2. Manufacturer’s Warranty: Submit, for Owners acceptance:
3. Manufacturer’s standard warranty documents executed by authorized company official. Manufacturer’s warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents.
4. Warranty period; Seven (7) year warranty on mechanical and steel structure from defects of manufacture and workmanship, commencing on Date of Substantial Completion.
5. Warranty will be null and void if products are installed on flooring not meeting minimum structural requirements as specified by manufacturer.

Section 2.01    SEATING/TABLET SYSTEM

1. Manufacturer: Navetta division of Shuttlesystem LLC
2. Product: Eidos Auditorium Seat
3. Product specifications
4. Seat – Fully upholstered seat with 2.75” average thickness 2.5 lb/cu. ft. HR density self-extinguishing polyurethane foam provides maximum comfort and durability. Gravity uplift seat with counterweight mechanism automatically returns the seat to its vertical position when unoccupied. Optional California Bulletin 133 compliance. Center to center seat sizes in 20.5”, 21.75”, 22.75”, 24.5”, 26.75”.
5. Back – Fully upholstered upper back outer panel. Lower panel also available in polypropylene and wood. Inner panel is made of 0.4” thick birch plywood, upholstered with 2.75” average thickness 1.9 lb/cu. ft. density HR polyurethane foam with double curved ergonomic design for comfort / lumbar support. Back height is available in 36.2”, 38.2” and 44”. Center to center back sizes in 20.5”, 21.75”, 22.75”, 24.5”, 26.75”.
6. Side/Arms – Side panels available with fabric upholstery. Armrest structure is powder coated .160” steel. Armrest available upholstered with .8” thickness 3.75 lb/cu. ft. density foam padding, contoured injection molded ABS, or natural varnished wood.
7. Pedestal Supports – Formed oval steel tubing measuring 3.5” x 1.2” cross section, welded to .100” thick mounting flange. Epoxy powder coat finish.
8. Tablet Arm – Contoured phenolic tablet arm 13.75”wide and 10” deep. Machined swivel joint with mechanism tested to support 500 lbs. The tablet arm opens and stows in one movement for antipanic egress.
9. Options – Power provision, Aisle light with illuminated row letter and seat numbers, embroidered seat numbering, riser mounted standards, removable base, wood seat bottom and back panel.

Section 3.1      MANUFACTURER’S INSTRUCTIONS

1. Comply with manufacturer’s installation instructions, including bulletins, product catalog, installation instructions and product carton instructions for installation.

Section 3.2      EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances and materials properties as they affect anchors and fasteners and location of junction boxes.
2. Repair: Do not proceed until unsatisfactory components or facility conditions have been corrected.

Section 3.3      INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Tables in curved rows shall be installed at smooth radius.
2. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.
3. Replace: Replace any fabric damaged during installation.

Section 3.4      CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

Section 1.01    SUMMARY

1. Table systems
2. Fixed Table: Monolito System
3. Extent: Systems to be as indicated on drawings and as specified

Section 1.02    PRODUCT DESCRIPTION

1. Seat/Table Requirements:
2. Pedestal: provide table and supports providing fixed work surface with open access, supported by pedestals.
3. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. All current-carrying power system components shall be UL approved, and will have appropriate labeling documenting that approval.

Section 1.03    SUBMITTALS

1. General: Submit listed submittals in accordance with Contract and standard Submittals Procedures.
2. Product Data: Submit manufacturers’ product data, including product specification sheets, for products specified.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths.
4. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material.
5. Quality Assurance Submittals; Submit the following:
   • Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
   • Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating.
   • Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may affect the assembly or installation of products required.

Section 1.04    WARRANTY

Warranty for specified Navetta Lecture Room Products: Symmetra • Symmetra Plus • Omnia • Monolito

1. 1. Navetta provides the following warranty to the original purchaser of the above listed Navetta products sold in North America and installed by Navetta-approved installers. This warranty begins on the date of product invoice, is governed by and subject to the terms and conditions detailed below, and is non-transferable.
   2. Navetta warrants its products to be substantially free from material defects in materials and craftsmanship. Defects found during normal usage of the product will be covered during the warranty period set out below, provided that written notification of the alleged defect is given to Navetta at the address below prior to expiration of the applicable period. Navetta will at its sole discretion either repair or replace the product it determines to be defective with a comparable product. All other costs are excluded.
   3. The fulfillment of the warranty is under the control of Navetta. In the event Navetta fails to repair or replace a product it has determined is defective as provided herein, the purchaser’s sole remedy shall be the return of the purchase price actually paid by purchaser for the defective product on a prorated basis based upon a useful life of ten (10) years.

   Warranty Period

   1. Within ten (10) years of initial shipment: Fixed structural components.
   2. Within five (5) years of initial shipment: All other structural components, including seat support arms and pivot mechanisms, springs, tablet arms.
   3. Within three (3) years of initial shipment: Plastic components and paint finishes, wood, laminate and other surface finishes (note conditions as to color, grain, and texture set forth below).
   4. Within one (1) year of initial shipment: Power and electrical components, seating upholstery including foam (note restrictions as to color, grain, and texture below).

   Exclusions and Conditions
   This warranty excludes and does not apply to:

   1. Conditions other than normal wear and tear.
   2. Abuse, neglect, vandalism, or misuse.
   3. In-transit damage.
   4. Products altered or modified by the purchaser.
   5. Products installed on flooring that does not meet structural standards.
   6. Purchaser supplied or specified material, leather, and non-standard material and color finishes (whether purchased by the purchaser or Navetta).
   7. Natural variations occurring in wood and leather and/or color fastness and/or variations in matching of colors, grains or textures of materials.
   8. Product color change due to natural aging, UV exposure, cleaning solutions, or other causes.

   Disclaimer of all Other Warranties

   1. There are no other warranties than those expressly stated above, whether expressed or implied (including, but not limited to any warranty of merchantability or fitness for any particular purpose). Navetta is not liable for consequential or incidental damage arising from any product defect.

   Limitation of Liability

   1. Navetta’s total liability hereunder shall not exceed the purchase price paid for the allegedly defective product. In no event shall Navetta be liable for any indirect, consequential, incidental or special damages, including lost profits, loss of reputation, loss of goodwill, lost revenue, or any other economic or non economic loss.

   Warranty Notice Address

   Navetta division of Shuttlesystem
   11340 Montgomery Road, Ste 200
   Mason OH 45040
   513-489-3727

Section 2.01    TABLE SYSTEM

1. Manufacturer: Navetta division of Shuttlesystem LLC
2. Product: Monolito Fixed Table System
3. Product specifications
4. Pedestal Support – Construction: Pedestals shall be constructed of paired extruded structural aluminum columns measuring 2.3” x 2.2”, with heavy-duty .09” wall thickness and internal reinforcing ribs measuring .20” thickness.
5. Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts.
6. Pedestal Support Side Covers – Floor mounting hardware and top mounting hardware to be fully concealed by two 7.0” wide aluminum extruded removable panels.
7. Table mount – Top mount bracket shall be constructed of .25” thick steel plate with eight attaching screws allowing attachment to pedestal columns. Bracket shall provide four mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
8. Metal Finish – Steel brackets shall have powder-coat finish, aluminum pedestal columns and covers will have anodized finish.
9. Table Configuration – Table tops shall be designed to be assembled into continuous surface in straight, radius, or segmented configuration. Adjacent tops to be joined with two mechanical clamping fasteners. Tops shall have cutouts for tabletop power modules when specified. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified.
10. Table Top Construction – Table tops shall be nominal 1.25” thick warp-resistant construction with 1.125” particleboard center core sandwiched between .040” high pressure laminate top surface and phenolic backing surface. Assembly to be permanently bonded under continuous pressure in hot press.
11. Table Top Edge treatment – Edges shall be finished as specified, using 3mm PVC, “T” cross-section vinyl continuous molding, wood surface, or bonded resin edging.
12. Table Top Attachment – Table tops to attach to pedestal brackets with four #14 lag screws.
13. Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
14. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. Standard configuration positions modesty panels between pedestal supports.

Section 3.1      MANUFACTURER’S INSTRUCTIONS

1. Comply with manufacturer’s installation instructions, including bulletins, product catalog, installation instructions and product carton instructions for installation.

Section 3.2      EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances and materials properties as they affect anchors and fasteners and location of junction boxes.
2. Repair: Do not proceed until unsatisfactory components or facility conditions have been corrected.

Section 3.3      INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Tables in curbed rows shall be installed at smooth radius.
2. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.

Section 3.4      CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

Section 1.01    SUMMARY

1. Table systems with swingout seating
2. Fixed Table System with swingout seating: Symmetra Plus System
3. Extent: Systems to be as indicated on drawings and as specified

Section 1.02    PRODUCT DESCRIPTION

1. Seat/Table Requirements:
2. Pedestal: provide table and supports providing fixed work surface with open access, supported by pedestals.
3. Seating: Provide modular seating supported by swing arms on either side of each support pedestal, seats to independently swing out for access and swing back adjacent to table top when unoccupied.
4. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. All power system components shall be UL approved, including the steel pedestal table leg used for power entry, which shall be certified as a “UL Recognized Component,” and will have appropriate labeling documenting that approval.

Section 1.03    SUBMITTALS

1. General: Submit listed submittals in accordance with Contract and standard Submittals Procedures.
2. Product Data: Submit manufacturers’ product data, including product specification sheets, for products specified.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths.
4. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material.
5. Quality Assurance Submittals; Submit the following:
6. Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
7. Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating.
8. Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may affect the assembly or installation of products required.

Section 1.04    WARRANTY

1. Project Warranty: Refer to “Conditions of the Contract” to project warranty provisions.
2. Manufacturer’s Warranty: Submit, for Owners acceptance:
3. Manufacturer’s standard warranty documents executed by authorized company official. Manufacturer’s warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents.
4. Warranty period; Ten (10) year warranty on understructure and seating shells (when utilized) from defects of manufacture and workmanship, commencing on Date of Substantial Completion.
5. Warranty will be null and void if products are installed on flooring not meeting minimum structural requirements as specified by manufacturer.

Section 2.01    TABLE SYSTEM

1. Manufacturer: Navetta division of Shuttlesystem LLC
2. Product: Symmetra Fixed Table System
3. Product specifications
4. Inner Pedestal Support – Construction: Pedestals shall be constructed of 11 gauge steel tubing of oval cross-section measuring 3.15” x 1.57”.
5. Inner Pedestal Support Floor mount – Pedestal shall be computer-controlled welded to a .25” thick steel base plate measuring 8” x 4” with four slotted holes for mounting pedestal to floor with anchor bolts.
6. Inner Pedestal Support Base cover – Base plate to be fully covered after mounting with two-piece cover constructed of injection molded toughened nylon, attached with two machine screws.
7. Inner Pedestal Support Table mount – Top mount bracket shall be constructed of 11 gauge steel with four attaching bolts allowing attachment to pedestal and adjustment for variations in floor surface to provide alignment of adjacent tabletops without shimming tops. Bracket shall provide six mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
8. Inner Pedestal Support Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of vacuum formed ABS, attached with screws.
9. Outer Pedestal Support – Construction: Pedestals shall be constructed of paired extruded structural aluminum columns measuring 2.3” x 2.2”, with heavy-duty .09” wall thickness and internal reinforcing ribs measuring .20” thickness.
10. Outer Pedestal Support Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts.
11. Outer Pedestal Support Side Cover – Floor mounting hardware and top mounting hardware to be fully concealed by two 7.0” wide aluminum extruded removable panels.
12. Outer Pedestal Support Table mount – Top mount bracket shall be constructed of .25” thick steel plate with eight attaching screws allowing attachment to pedestal columns. Bracket shall provide four mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
13. Metal Finish – Steel components shall have powder-coat finish in finish specified. Aluminum components shall have anodized finish or powder-coat finish in finish specified.
14. Table Configuration – Table tops shall be designed to be assembled into continuous surface in straight, radius, or segmented configuration. Adjacent tops to be joined with two mechanical clamping fasteners. Tops shall have cutouts for tabletop power modules when specified. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified.
15. Table Top Construction – Table tops shall be nominal 1.25” thick warp-resistant construction with 1.125” particleboard center core sandwiched between .040” high pressure laminate top surface and phenolic backing surface. Assembly to be permanently bonded under continuous pressure in hot press.
16. Table Top Edge treatment – Edges shall be finished as specified, using 3mm PVC, “T” cross-section vinyl continuous molding, wood surface, or bonded resin edging.
17. Inner Pedestal Support Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag screws.
18. Outer Pedestal Support Table Top Attachment – Table tops to attach to pedestal brackets with 4 #14 lag screws.
19. Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
20. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. Standard configuration provides .5” clearance between adjacent modesty panels, continuous configuration optional.
21. Seat Support Mechanism – Seat support arms shall be constructed of 11 gauge oval steel tubing formed to a radius, with industry-standard taper receiver to accept chair cylinder. Arms on either side of the support pedestal shall pivot independently from a steel kingpin mounted in a die cast aluminum housing with powder coat finish. A field-adjustable torsion spring shall be implemented to automatically return the seat adjacent to the table top when not occupied.
22. Seat Specifications – A large selection of standard seats are available with the Symmetra Plus system, and virtually any other seat can be used with the system, including plastic, mesh back, and wood construction, upholstered or not, as the customer prefers. See specified seat documentation for detailed specification.

Section 3.1      MANUFACTURER’S INSTRUCTIONS

1. Comply with manufacturer’s installation instructions, including bulletins, product catalog, installation instructions and product carton instructions for installation.

Section 3.2      EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances and materials properties as they affect anchors and fasteners and location of junction boxes.
2. Repair: Do not proceed until unsatisfactory components or facility conditions have been corrected.

Section 3.3      INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Tables in curbed rows shall be installed at smooth radius.
2. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.

Section 3.4      CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

Section 1.01    SUMMARY

1. Table systems
2. Fixed Table: Symmetra System
3. Extent: Systems to be as indicated on drawings and as specified

Section 1.02    PRODUCT DESCRIPTION

1. Seat/Table Requirements:
2. Pedestal: provide table and supports providing fixed work surface with open access, supported by pedestals.
3. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. All power system components shall be UL approved, including the steel pedestal table leg used for power entry, which shall be certified as a “UL Recognized Component,” and will have appropriate labeling documenting that approval.

Section 1.03    SUBMITTALS

1. General: Submit listed submittals in accordance with Contract and standard Submittals Procedures.
2. Product Data: Submit manufacturers’ product data, including product specification sheets, for products specified.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths.
4. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material.
5. Quality Assurance Submittals; Submit the following:
   • Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
   • Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating.
   • Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may affect the assembly or installation of products required.

Section 1.04    WARRANTY

1. Project Warranty: Refer to “Conditions of the Contract” to project warranty provisions.
2. Manufacturer’s Warranty: Submit, for Owners acceptance:
3. Manufacturer’s standard warranty documents executed by authorized company official. Manufacturer’s warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents.
4. Warranty period; Ten (10) year warranty on understructure and seating shells (when utilized) from defects of manufacture and workmanship, commencing on Date of Substantial Completion.
5. Warranty will be null and void if products are installed on flooring not meeting minimum structural requirements as specified by manufacturer.

Section 2.01    TABLE SYSTEM

1. Manufacturer: Navetta division of Shuttlesystem LLC
2. Product: Symmetra Fixed Table System
3. Product specifications
4. Inner Pedestal Support – Construction: Pedestals shall be constructed of 11 gauge steel tubing of oval cross-section measuring 3.15” x 1.57”.
5. Inner Pedestal Support Floor mount – Pedestal shall be computer-controlled welded to a .25” thick steel base plate measuring 8” x 4” with four slotted holes for mounting pedestal to floor with anchor bolts.
6. Inner Pedestal Support Base cover – Base plate to be fully covered after mounting with two-piece cover constructed of injection molded toughened nylon, attached with two machine screws.
7. Inner Pedestal Support Table mount – Top mount bracket shall be constructed of 11 gauge steel with four attaching bolts allowing attachment to pedestal and adjustment for variations in floor surface to provide alignment of adjacent tabletops without shimming tops. Bracket shall provide six mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
8. Inner Pedestal Support Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of injection molded ABS, attached with machine screws.
9. Outer Pedestal Support – Construction: Pedestals shall be constructed of paired extruded structural aluminum columns measuring 2.3” x 2.2”, with heavy-duty .09” wall thickness and internal reinforcing ribs measuring .20” thickness.
10. Outer Pedestal Support Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts.
11. Outer Pedestal Support Side Cover – Floor mounting hardware and top mounting hardware to be fully concealed by two 7.0” wide aluminum extruded removable panels.
12. Outer Pedestal Support Table mount – Top mount bracket shall be constructed of .25” thick steel plate with eight attaching screws allowing attachment to pedestal columns. Bracket shall provide four mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
13. Metal Finish – Steel components shall have powder-coat finish in finish specified. Aluminum components shall have anodized finish or powder-coat finish in finish specified.
14. Table Configuration – Table tops shall be designed to be assembled into continuous surface in straight, radius, or segmented configuration. Adjacent tops to be joined with two mechanical clamping fasteners. Tops shall have cutouts for tabletop power modules when specified. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified.
15. Table Top Construction – Table tops shall be nominal 1.25” thick warp-resistant construction with 1.125” particleboard center core sandwiched between .040” high pressure laminate top surface and phenolic backing surface. Assembly to be permanently bonded under continuous pressure in hot press.
16. Table Top Edge treatment – Edges shall be finished as specified, using 3mm PVC, “T” cross-section vinyl continuous molding, wood surface, or bonded resin edging.
17. Inner Pedestal Support Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag screws.
18. Outer Pedestal Support Table Top Attachment – Table tops to attach to pedestal brackets with 4 #14 lag screws.
19. Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
20. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. Standard configuration provides .5” clearance between adjacent modesty panels, continuous configuration optional.

Section 3.1      MANUFACTURER’S INSTRUCTIONS

1. Comply with manufacturer’s installation instructions, including bulletins, product catalog, installation instructions and product carton instructions for installation.

Section 3.2      EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances and materials properties as they affect anchors and fasteners and location of junction boxes.
2. Repair: Do not proceed until unsatisfactory components or facility conditions have been corrected.

Section 3.3      INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Tables in curbed rows shall be installed at smooth radius.
2. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.

Section 3.4      CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

1.01 SUMMARY

1. Section includes: Auditorium Seating.
2. Manufacturer’s Fixed Auditorium Seating with Tablet Arm.
3. Extent: Extent of the fixed seating as indicated on drawings and as specified herein including product data sheets.

1.02 PRODUCT DESCRIPTION

Seat Requirements:

1. Chair: Deliver and install a fixed seat auditorium seat with gravity uplift seat and optional anti-panic tablet arm in accordance with drawings.
2. Dimensions are nominal and are based on the current product information available.

1.03 SUBMITTALS

1. General: Submit listed submittals in accordance with “Conditions of the Contract”  and Division 1 Submittals Procedures section.
2. Product Data: Submit manufacturer’s product data, including product specification sheets, for specific products.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths.
4. Samples: Submit selection and verification samples of finishes, colors and textures for each exposed material.
5. Quality Assurance Submittals; Submit the following;
   • Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
   • Installer Qualifications: Submit certification indicating installer is qualified to install manufacturers seating.
   • Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may effect the assembly or installation of products required.

1.04 WARRANTY

1. Project Warranty: Refer to “Conditions of the Contract” to project warranty  provisions.
2. Manufactures Warranty; Submit, for Owners acceptance, manufacturers standard warranty documents executed by authorized company official.
3. Manufactures warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents.
4. Warranty period; (10) year warranty on understructure and shells from manufacture defect and workmanship, commencing on Date of Substantial Completion.

2.01 SEATING/TABLE SYSTEM

PRODUCT DESCRIPTION

1. Seat: formed on a high impact injection polypropylene frame with five serpentine springs and polyurethane cold molded anatomic cushion. Gravity self-rising system mounted on an injected high impact polypropylene structure. Pivot connection is a 5/8” round steel axle, with two side wings supports stamped with 7 gauge steel. Two inner supports stamped in 11 gauge steel. The bottom is protected by an injected high impact polypropylene cover which is textured on the outer face. Center to center seat sizes in 19”, 20”, 21”, 22”, 23”.
2. Back: polyurethane cold molded cushioning, with an ergonomically shape attached on an integral base made of high impact injection polypropylene, structured with multi-ribbed on the inner side and textured on its outer side. Featuring with two folded wing brackets made of 14 gauge steel to be attached to the center standards and aisle ends and has a rear back cover made of injected high impact polypropylene which is textured on the outer face. Center to center back sizes in 19”, 20”, 21”, 22”, 23”.
3. Side/Arms: Internal support structure steel plate painted with powder coat in aluminum or anthracite. Side panels available with fabric upholstery, laminate or wood. Armrest in polypropylene, solid wood or upholstered with non-deformable polyurethane foam.
4. Pedestal Supports: center and sides made of rectangular section tube of 1” x 3” 14 gauge. Back support in 14 gauge, seat support in 7 gauge, arm rest support 14 gauge, foot plate to be fixed on floor in 11 gauge steel.
5. FINISH: The metal parts previously degreased and phosphatized, are protected by EPOXICA and micro-sprayed thermoplastic painting, with electrostatic equipment and oven baked up to 200°C.
6. Tablet Arm: Tablet is MDF construction with laminate finish. Tablet shall be 11.75” wide by 10.25” deep.  3

3.01 MANUFACTURERS INSTRUCTIONS

1. Comply with bulletins, product catalog, installation instructions and product carton instructions for installation

3.02 EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances.
2. Repair: Do not proceed until unsatisfactory conditions have been corrected.

3.03 INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Chair and tables in curbed rows shall be installed at smooth radius.
2. Adjustments: Adjust seat mechanism to ensure seats in each row are aligned when in the upright position.
3. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.
4. Replace: Replace any fabric damaged during installation.

3.04 CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project  site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

Section 1.01    SUMMARY

1. Table systems
2. Fixed Table: Symmetra System
3. Extent: Systems to be as indicated on drawings and as specified

Section 1.02    PRODUCT DESCRIPTION

1. Seat/Table Requirements:
2. Pedestal: provide table and supports providing fixed work surface with open access, supported by pedestals.
3. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. All power system components shall be UL approved, including the steel pedestal table leg used for power entry, which shall be certified as a “UL Recognized Component,” and will have appropriate labeling documenting that approval.

Section 1.03    SUBMITTALS

1. General: Submit listed submittals in accordance with Contract and standard Submittals Procedures.
2. Product Data: Submit manufacturers’ product data, including product specification sheets, for products specified.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths.
4. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material.
5. Quality Assurance Submittals; Submit the following:
6. Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
7. Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating.
8. Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may affect the assembly or installation of products required.

Section 1.04    WARRANTY
Warranty for specified Navetta Lecture Room Products: Symmetra • Symmetra Plus • Omnia • Monolito

1. 1. Navetta provides the following warranty to the original purchaser of the above listed Navetta products sold in North America and installed by Navetta-approved installers. This warranty begins on the date of product invoice, is governed by and subject to the terms and conditions detailed below, and is non-transferable.
   2. Navetta warrants its products to be substantially free from material defects in materials and craftsmanship. Defects found during normal usage of the product will be covered during the warranty period set out below, provided that written notification of the alleged defect is given to Navetta at the address below prior to expiration of the applicable period. Navetta will at its sole discretion either repair or replace the product it determines to be defective with a comparable product. All other costs are excluded.
   3. The fulfillment of the warranty is under the control of Navetta. In the event Navetta fails to repair or replace a product it has determined is defective as provided herein, the purchaser’s sole remedy shall be the return of the purchase price actually paid by purchaser for the defective product on a prorated basis based upon a useful life of ten (10) years.

   Warranty Period

   1. Within ten (10) years of initial shipment: Fixed structural components.
   2. Within five (5) years of initial shipment: All other structural components, including seat support arms and pivot mechanisms, springs, tablet arms.
   3. Within three (3) years of initial shipment: Plastic components and paint finishes, wood, laminate and other surface finishes (note conditions as to color, grain, and texture set forth below).
   4. Within one (1) year of initial shipment: Power and electrical components, seating upholstery including foam (note restrictions as to color, grain, and texture below).

   Exclusions and Conditions
   This warranty excludes and does not apply to:

   1. Conditions other than normal wear and tear.
   2. Abuse, neglect, vandalism, or misuse.
   3. In-transit damage.
   4. Products altered or modified by the purchaser.
   5. Products installed on flooring that does not meet structural standards.
   6. Purchaser supplied or specified material, leather, and non-standard material and color finishes (whether purchased by the purchaser or Navetta).
   7. Natural variations occurring in wood and leather and/or color fastness and/or variations in matching of colors, grains or textures of materials.
   8. Product color change due to natural aging, UV exposure, cleaning solutions, or other causes.

   Disclaimer of all Other Warranties

   1. There are no other warranties than those expressly stated above, whether expressed or implied (including, but not limited to any warranty of merchantability or fitness for any particular purpose). Navetta is not liable for consequential or incidental damage arising from any product defect.

   Limitation of Liability

   1. Navetta’s total liability hereunder shall not exceed the purchase price paid for the allegedly defective product. In no event shall Navetta be liable for any indirect, consequential, incidental or special damages, including lost profits, loss of reputation, loss of goodwill, lost revenue, or any other economic or non economic loss.

   Warranty Notice Address

2. Navetta division of ShuttleSystem
   11340 Montgomery Rd,Suite 200
   Mason, OH 45040
   513-489-3727

Section 2.01    TABLE SYSTEM

1. Manufacturer: Navetta division of Shuttlesystem LLC
2. Product: Symmetra Fixed Table System
3. Product specifications
4. Pedestal Support – Construction: Pedestals shall be constructed of 11 gauge steel tubing of oval cross-section measuring 3.15” x 1.57”.
5. Floor mount – Pedestal shall be computer-controlled welded to a .25” thick steel base plate measuring 8” x 4” with four slotted holes for mounting pedestal to floor with anchor bolts.
6. Base cover – Base plate to be fully covered after mounting with two-piece cover constructed of injection molded toughened nylon, attached with two machine screws.
7. Table mount – Top mount bracket shall be constructed of 11 gauge steel with four attaching bolts allowing attachment to pedestal and adjustment for variations in floor surface to provide alignment of adjacent tabletops without shimming tops. Bracket shall provide six mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
8. Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of injection molded ABS, attached with machine screws.
9. Metal Finish – Metal components shall have powder-coat finish in finish specified.
10. Table Configuration – Table tops shall be designed to be assembled into continuous surface in straight, radius, or segmented configuration. Adjacent tops to be joined with two mechanical clamping fasteners. Tops shall have cutouts for tabletop power modules when specified. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified.
11. Table Top Construction – Table tops shall be nominal 1.25” thick warp-resistant construction with 1.125” particleboard center core sandwiched between .040” high pressure laminate top surface and phenolic backing surface. Assembly to be permanently bonded under continuous pressure in hot press.
12. Table Top Edge treatment – Edges shall be finished as specified, using 3mm PVC, “T” cross-section vinyl continuous molding, wood surface, or bonded resin edging.
13. Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag bolts.
14. Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
15. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. Standard configuration provides .5” clearance between adjacent modesty panels, continuous configuration optional.
16. End Panel Construction – If specified, end panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
17. End Panel Attachment – End Panels shall attach with supplied rigid metal brackets and hardware.

Section 3.1      MANUFACTURER’S INSTRUCTIONS

1. Comply with manufacturer’s installation instructions, including bulletins, product catalog, installation instructions and product carton instructions for installation.

Section 3.2      EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances and materials properties as they affect anchors and fasteners and location of junction boxes.
2. Repair: Do not proceed until unsatisfactory components or facility conditions have been corrected.

Section 3.3      INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Tables in curbed rows shall be installed at smooth radius.
2. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.

Section 3.4      CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

Section 1.01    SUMMARY

1. Table systems with swingout seating
2. Fixed Table System with swingout seating: Symmetra Plus System
3. Extent: Systems to be as indicated on drawings and as specified

Section 1.02    PRODUCT DESCRIPTION

1. Seat/Table Requirements:
2. Pedestal: provide table and supports providing fixed work surface with open access, supported by pedestals.
3. Seating: Provide modular seating supported by swing arms on either side of each support pedestal, seats to independently swing out for access and swing back adjacent to table top when unoccupied. Auto-height auto-return seat cylinder allowing seat height adjustment, chair rotation and center return. Height adjustment mechanism and cylinder utilize precision taper fit, which eliminates requirement of tools and set screws. All seats must spin 360 degrees with standard spacing.
4. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. All power system components shall be UL approved, including the steel pedestal table leg used for power entry, which shall be certified as a “UL Recognized Component,” and will have appropriate labeling documenting that approval.

Section 1.03    SUBMITTALS

1. General: Submit listed submittals in accordance with Contract and standard Submittals Procedures.
2. Product Data: Submit manufacturers’ product data, including product specification sheets, for products specified.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths. Must meet all current ADA requirements.
4. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material.
5. Quality Assurance Submittals; Submit the following:
6. Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
7. Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating. Must have a minimum of 5 years of experience.
8. Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may affect the assembly or installation of products required.

Section 1.04    WARRANTY

1. Project Warranty: Refer to “Conditions of the Contract” to project warranty provisions.
2. Manufacturer’s Warranty: Submit, for Owners acceptance:
3. Manufacturer’s standard warranty documents executed by authorized company official. Manufacturer’s warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents.
4. Warranty period; Ten (10) year warranty on understructure and seating shells (when utilized) from defects of manufacture and workmanship, commencing on Date of Substantial Completion.
5. Warranty will be null and void if products are installed on flooring not meeting minimum structural requirements as specified by manufacturer.

Section 2.01    TABLE SYSTEM

1. Manufacturer: Navetta division of Shuttlesystem LLC
2. Product: Symmetra Fixed Table System
3. Product specifications
4. Pedestal Support – Construction: Pedestals shall be constructed of 11 gauge steel tubing of oval cross-section measuring 3.15” x 1.57”.
5. Floor mount – Pedestal shall be computer-controlled welded to a .25” thick steel base plate measuring 8” x 4” with four slotted holes for mounting pedestal to floor with anchor bolts.
6. Base cover – Base plate to be fully covered after mounting with two-piece cover constructed of injection molded toughened nylon, attached with two machine screws.
7. Table mount – Top mount bracket shall be constructed of 11 gauge steel with four attaching bolts allowing attachment to pedestal and adjustment for variations in floor surface to provide alignment of adjacent tabletops without shimming tops. Bracket shall provide six mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
8. Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of injection molded ABS, attached with machine screws.
9. Metal Finish – Metal components shall have powder-coat finish in finish specified.
10. Table Configuration – Table tops shall be designed to be assembled into continuous surface in straight, radius, or segmented configuration. Adjacent tops to be joined with two mechanical clamping fasteners. Tops shall have cutouts for tabletop power modules when specified. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified.
11. Table Top Construction – Table tops shall be nominal 1.25” thick warp-resistant construction with 1.125” particleboard center core sandwiched between .040” high pressure laminate top surface and phenolic backing surface. Assembly to be permanently bonded under continuous pressure in hot press.
12. Table Top Edge treatment – Edges shall be finished as specified, using 3mm PVC, “T” cross-section vinyl continuous molding, wood surface, or bonded resin edging.
13. Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag bolts.
14. Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
15. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. Standard configuration provides .5” clearance between adjacent modesty panels, continuous configuration optional.
16. End Panel Construction – If specified, end panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
17. End Panel Attachment – End Panels shall attach with supplied rigid metal brackets and hardware.
18. Seat Support Mechanism – Seat support arms shall be constructed of 11 gauge oval steel tubing formed to a radius, with industry-standard taper receiver to accept chair cylinder. Arms on either side of the support pedestal shall pivot independently from a steel kingpin mounted in a die cast aluminum housing with powder coat finish. A field-adjustable torsion spring shall be implemented to automatically return the seat adjacent to the table top when not occupied. Must meet static load test requirement of 600 lbs. Auto-height auto-return seat cylinder allowing seat height adjustment, chair rotation and center return. Height adjustment mechanism and cylinder utilize precision taper fit, which eliminates requirement of tools and set screws.
19. Seat Specifications – A large selection of standard seats are available with the Symmetra Plus system, and virtually any other seat can be used with the system, including plastic, mesh back, and wood construction, upholstered or not, as the customer prefers. See specified seat documentation for detailed specification. All seats spin 360 degrees.

Section 3.1      MANUFACTURER’S INSTRUCTIONS

1. Comply with manufacturer’s installation instructions, including bulletins, product catalog, installation instructions and product carton instructions for installation.

Section 3.2      EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances and materials properties as they affect anchors and fasteners and location of junction boxes.
2. Repair: Do not proceed until unsatisfactory components or facility conditions have been corrected.

Section 3.3      INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Tables in curbed rows shall be installed at smooth radius.
2. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.

Section 3.4      CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

Section 1.01    SUMMARY

1. Table systems
2. Fixed Table: Symmetra System
3. Extent: Systems to be as indicated on drawings and as specified

Section 1.02    PRODUCT DESCRIPTION

1. Seat/Table Requirements:
2. Pedestal: provide table and supports providing fixed work surface with open access, supported by pedestals.
3. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. All power system components shall be UL approved, including the steel pedestal table leg used for power entry, which shall be certified as a “UL Recognized Component,” and will have appropriate labeling documenting that approval.

Section 1.03    SUBMITTALS

1. General: Submit listed submittals in accordance with Contract and standard Submittals Procedures.
2. Product Data: Submit manufacturers’ product data, including product specification sheets, for products specified.
3. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths.
4. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material.
5. Quality Assurance Submittals; Submit the following:
6. Certificates: Product certificates signed by manufacturer certifying materials comply with specify performance characteristics and criteria and physical requirements.
7. Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating.
8. Bidder Qualifications: Submit certification, prior to drawing completion, indicating site has been inspected for any conditions that may affect the assembly or installation of products required.

Section 1.04    WARRANTY

1. Project Warranty: Refer to “Conditions of the Contract” to project warranty provisions.
2. Manufacturer’s Warranty: Submit, for Owners acceptance:
3. Manufacturer’s standard warranty documents executed by authorized company official. Manufacturer’s warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents.
4. Warranty period; Ten (10) year warranty on understructure and seating shells (when utilized) from defects of manufacture and workmanship, commencing on Date of Substantial Completion.
5. Warranty will be null and void if products are installed on flooring not meeting minimum structural requirements as specified by manufacturer.

Section 2.01    TABLE SYSTEM

1. Manufacturer: Navetta division of Shuttlesystem LLC
2. Product: Symmetra Fixed Table System
3. Product specifications
4. Inner Pedestal Support – Construction: Pedestals shall be constructed of 11 gauge steel tubing of oval cross-section measuring 3.15” x 1.57”.
5. Inner Pedestal Support Floor mount – Pedestal shall be computer-controlled welded to a .25” thick steel base plate measuring 8” x 4” with four slotted holes for mounting pedestal to floor with anchor bolts.
6. Inner Pedestal Support Base coverBase plate to be fully covered after mounting with two-piece cover constructed of injection molded toughened nylon, attached with two machine screws.
7. Inner Pedestal Support Table mount – Top mount bracket shall be constructed of 11 gauge steel with four attaching bolts allowing attachment to pedestal and adjustment for variations in floor surface to provide alignment of adjacent tabletops without shimming tops. Bracket shall provide six mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
8. Inner Pedestal Support Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of injection molded ABS, attached with machine screws.
9. Outer Pedestal Support – Construction: Pedestals shall be constructed of paired extruded structural aluminum columns measuring 2.3” x 2.2”, with heavy-duty .09” wall thickness and internal reinforcing ribs measuring .20” thickness.
10. Outer Pedestal Support Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts.
11. Outer Pedestal Support Side Cover – Floor mounting hardware and top mounting hardware to be fully concealed by two 7.0” wide aluminum extruded removable panels.
12. Outer Pedestal Support Table mount – Top mount bracket shall be constructed of .25” thick steel plate with eight attaching screws allowing attachment to pedestal columns. Bracket shall provide four mounting holes for attaching table top and designed to accept optional power and/or data electrical system.
13. Metal Finish – Steel components shall have powder-coat finish in finish specified. Aluminum components shall have anodized finish or powder-coat finish in finish specified.
14. Table Configuration – Table tops shall be designed to be assembled into continuous surface in straight, radius, or segmented configuration. Adjacent tops to be joined with two mechanical clamping fasteners. Tops shall have cutouts for tabletop power modules when specified. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified.
15. Table Top Construction – Table tops shall be nominal 1.25” thick warp-resistant construction with 1.125” particleboard center core sandwiched between .040” high pressure laminate top surface and phenolic backing surface. Assembly to be permanently bonded under continuous pressure in hot press.
16. Table Top Edge treatment – Edges shall be finished as specified, using 3mm PVC, “T” cross-section vinyl continuous molding, wood surface, or bonded resin edging.
17. Inner Pedestal Support Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag screws.
18. Outer Pedestal Support Table Top Attachment – Table tops to attach to pedestal brackets with 4 #14 lag screws.
19. Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish.
20. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. Standard configuration provides .5” clearance between adjacent modesty panels, continuous configuration optional.

Section 3.1      MANUFACTURER’S INSTRUCTIONS

1. Comply with manufacturer’s installation instructions, including bulletins, product catalog, installation instructions and product carton instructions for installation.

Section 3.2      EXAMINATION

1. Site Verification: Prior to installation verify, with installer present, that substrates and conditions comply with the requirements for construction tolerances and materials properties as they affect anchors and fasteners and location of junction boxes.
2. Repair: Do not proceed until unsatisfactory components or facility conditions have been corrected.

Section 3.3      INSTALLATION

1. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Tables in curbed rows shall be installed at smooth radius.
2. Repair: Repair minor abrasions and imperfections in painted surfaces with a coating that matches the factory- applied finish.

Section 3.4      CLEANING AND PROTECTION

1. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Remove construction debris, including cartons from project site and legally dispose of debris.
2. Protection: Protect installed product and finished surfaces from damage during construction.

Technical features

Backrest Inner structure in beech plywood, 15 mm thick; Padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 30 kg Kg/m3, attached to the wood structure by means of adhesive waterbased resins. Upholstery made in fabric not directly glued to the padding.

Back

mechanism kit with gas cylinder Side leg fixing plate in laser-cut steel plate, 5 mm thick Side legs connection plate in laser-cut and folded steel plate, 5mm thick; Supports of the backrest mechanism in laser-cut steel plate, pressed and folded, 5mm thick, with self-lubricating bushings. 200 Newton gas cylinder with quick fixing system.

Seat

Structure in beech plywood, 15 mm thick with side supports in pressed steel plate, 3mm thick, and 15mm steel rod. Padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 40 kg Kg/m3, attached to the wood structure by means of adhesive water-based resins Counterweight in 30x6mm laminated steel. Upholstery made in fabric not directly glued to the padding.

Side

leg Structure in 4mm steel plate; kickplate in 10mm thick pressed steel plate with 2 floor fixing points. Side and lower panels in fir chipboard, 8mm thick Side padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 40 kg Kg/m3, attached to the wood structure by means of adhesive water-based resins. Front and back padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 65 kg Kg/m3, attached to the closing panels by means of adhesive water-based resins. Armrest padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 65 kg Kg/m3, attached to the closing panels by means of adhesive water-based resins. Seat rotation mechanism in polypropylene.

Accessories

Seat and row numbering thermo glued or embroidered. Custom colors for the metal structure are available Screws for fixing on a R35 concrete floor Flip-up antipanic writing tablet in the side leg, rounded edges, in black HPL, 8 mm. Supports in steel plate, 2,5 mm thick and steel rod of 12mm. Mobile hinges in brass.